FERRARI LaFERRARI APERTA NEW LHD

FERRARI LaFERRARI APERTA New LHD

Ferrari LaFerrari Aperta new LHD available in December 2018 –  delivery kms, Ferrari LaFerrari Aperta. Rosso Corsa racing red with black leather and alcantara trim, piped in red, Prancing horse crests, lift system. Full spec car with carbon roof, carbon lower body, carbon interior pack, carbon diffuser and splitters, silver wheels with red brake calipers and titanium exhaust tips. Full Ferrari Warranty.

Unrestricted sale which means immediate use and not confined solely to EU.

Attractive finance or leasing available with FFS.

The LaFerrari Aperta is a limited production version (209 units) of the LaFerrari, with a removable carbon-fibre hard top and a removable soft top. Other changes include more efficient powertrain’s control electronics, re-angled radiators to direct air flow out along the underbody rather than over the bonnet, a longer front air dam to help boost downforce, L-shaped flap on the upper corner of each windscreen pillar to reduce compression on the rear of the cabin in the absence of a roof, different butterfly door angle with different wheel arches and a new carbon fibre insert allowing the doors to rotate.

The vehicle was unveiled in Paris 2016. Like past convertible Ferrari models, it uses the Aperta label to denote its retractable roof. According to Ferrari, all units have already been sold to customers via exclusive invitation.

Specifications

LaFerrari is the first mild hybrid from Ferrari, providing the highest power output of any Ferrari whilst decreasing fuel consumption by 40 percent. LaFerrari’s internal combustion engine is a mid-rear mounted Ferrari F140 65° V12 with a 6.3-litre (6262 cc) capacity producing 800 ps (588 kW, 789 bhp) @ 9000 rpm and 700 N·m (520 lbf·ft) of torque @ 6,750 rpm, supplemented by a 163 PS (120 kW; 161 bhp) KERS unit (called HY-KERS), which will provide short bursts of extra power. The KERS system adds extra power to the combustion engine’s output level for a total of 963 PS (708 kW; 950 bhp) and a combined torque of 900 N·m (664 lb·ft). Ferrari claims CO2 emissions of 330 g/km. The engine’s bore and stroke is 94×75.2 mm with a compression ratio of 13.5:1 and a specific power output of 94 kW (128 PS) per litre. It is connected to a 7-speed dual-clutch transmission and the car is rear wheel drive.

Equipment

The car is equipped with carbon-ceramic Brembo discs on the front (398 mm) and rear (380 mm), with the car sitting on Pirelli P Zero Corsa tires measuring 265/30 R 19 and 345/30 R 20 respectively.

Ferrari LaFerrari Aperta uses a carbon fibre monocoque structure developed by Ferrari’s F1 technical director Rory Byrne, with a claimed 27 percent more torsional rigidity and 22 percent more beam stiffness than the Enzo. It has a double wishbone suspension in the front and a multi link suspension in the rear.

LaFerrari has a number of electronic controls including ESC, high performance ABS/EBD (anti-lock braking system/electronic brake distribution), EF1-Trac F1 electronic traction control integrated with the hybrid system, E-Diff 3 third generation electronic differential, SCM-E Frs magnetorheological damping with twin solenoids (Al-Ni tube), and active aerodynamics to enable maximum performance.

Performance

Ferrari states that the Ferrari LaFerrari Aperta has a top speed exceeding 217 mph (349 km/h), similar to the Enzo’s top speed, however, it is capable of reaching 100 km/h (62 mph) in less than 3 seconds, 200 km/h (124 mph) in under seven seconds, and a speed of 300 km/h (186 mph) in 15 seconds.Ferrari also claims that the car has lapped its Fiorano test circuit in 1:19.70 which is faster than any other road-legal car Ferrari has ever produced.

NON RESTRICTED SALE

PRICE : €POA

FOR FURTHER INFORMATION, PLEASE CALL 07785 355 378 OR FROM OVERSEAS +44 7785 355 378.

WORLDWIDE SHIPPING AVAILABLE

Library pics.

Sunseeker Portifino 53

Sunseeker Portifino 53

1/20 SCALE EXACT REPLICA BUILT ON COMMISSION by AMI MODELS – CURVATURE

HIGH QUALITY ONE OFF SUNSEEKER PORTIFINO 53 YACHT MODEL BUILT TO EXACTING STANDARDS BY WELL KNOWN MODEL MAKERS- CURVATURE – FOR SUNSEEKER TO USE AS DISPLAY MODEL AT BOAT SHOWS AROUND THE WORLD.

SUN07
SUNSEEKER BOAT SIZE : LENGTH 920mm, BEAM 290mm, HEIGHT 360mm
Comes with large blue crate as pictured, fixed plinth and box cover. Replacement cost today would be nearing £12000. Over 500 man hours went into making this super model which would enhance any office, reception or home.

SUN01 SUN02 SUN03 SUN04 SUN05 SUN06 SUN07 SUN08 SUN09 SUN10This is what Curvature say on their website homepage :

Curvature Group is one of the most respected and professional model making and prototyping companies in the UK. We take pride in our product, and specialise in exceeding our client’s expectations with our high level of service, attention to detail and quick turnaround times whilst maintaining superb part quality and highest levels of finish.

The team at Curvature Group are skilled, experienced and competent individuals. The exacting nature of model making demands the highest levels of attention to detail and surgical precision to continually meet and exceed expectations. With over 100 years of combined experience their skill is without doubt, but requirements rarely stand still and the ability to innovate is paramount. New designs, new shapes and forms, new materials, novel mechanisms and increasing complexity all contrive to push the boundaries and test our limits. But with an agile, flexible, innovative and resourceful team we can confidently meet all the challenges now and in the future.

We at Curvature Group understand the role that technology plays in the production of reference models and have continued to research and apply the best and most appropriate technology to enhance the process. We are committed to innovation and R&D not only in new technology, but also in materials, processes and techniques.

We work from our purpose built facility situated near Tring in Hertfordshire and are accessible less than an hour by train from London’s West End and 15 mins north of Junction 20 of the M25.

Price : £4995 Plus P&P
https://www.youtube.com/watch?v=xoitegszoRc
FOR FURTHER INFORMATION ABOUT THIS SUNSEEKER MODEL, PLEASE CALL 07785 355 378 OR +44 7785 355 378 FROM OVERSEAS.
WORLDWIDE DELIVERY AVAILABLE.